How To Install A Bat House. Install 1 5/8” screws to secure cleats to bat house. Wood cutting (30 minutes) measure and mark where you need to cut the wood according to the plan.
Canadian Wildlife Federation Install a Box from cwf-fcf.org
By following these directions, you simply give yourself the absolute best chance at attracting bats. Choosing a good location greatly affects the success of your bat house, so see our tips. Mount the top pole on the post, and make markings for drilling the holes.
The Bat House Frame Typically Extends Down The Sides And Along The Top 1 ½”.
3 1/4″ (8.5 cm) with the cap’s additional overhang of more than an inch. How to hang a bat house. Wood cutting (30 minutes) measure and mark where you need to cut the wood according to the plan.
Ideally, You Have A Natural Source Of Water Within 1,500 Feet Of Your Property.
Recently bat houses—like bird, butterfly and bee homes—have become more popular among the home gardener and hobby farmer. Install 1 5/8” screws to secure cleats to bat house. Keep bat houses at least 20 to 30 feet away from tree branches and other obstructions that can interfere with their flight.
23 1/2″ (60 Cm) Depth Of Box:
With the bat house in place, take one of the included 2 ½” mounting screws with countersunk steel washer and fasten the top of the bat house to the pole mount bracket, spacing the screws evenly across the top lip of the bat house. Sure screws will embed into the frame of the bat house and do not protrude into the roosting cavity. Near a water source, but at least 20 feet from the shoreline.
Using A Ladder, Move Up To The Section Of The Wall Where The Bat House Will Be Attached.
You also need to provide the bats with a roughly grooved landing pad. Are you ready to hang your bat house on a. Drill the screws through the exposed section of the bracket and tighten it.
Before You Hang Your Bat House, You’ll Need To Paint It The Right Color.
To install a bat house, start by using the digging bar, excavate a hole about 3 feet deep. Bat houses need to be installed at least 12 to 15 feet above the ground and about 15 feet away from tree limbs. The final step is to attach the bat house.
Post a Comment for "How To Install A Bat House"